Portable CNC Profile cutting Machine
DigiCut Portable CNC Oxy-fuel profile cutting machine
DigiCut Portable CNC Plasma cutting machine
DigiCut Portable CNC Profile cutting machine
DigiCut Portable CNC cutting machine
We are manufacturers of Portable CNC Oxy-fuel profile cutting machine, Portable CNC Plasma cutting machine, Portable CNC Profile cutting machine and Portable CNC cutting machine based in Nasik, India.
DigiCut Portable CNC Profile cutting machine is an economical portable light weight CNC cutting machine to cut complex shapes of high quality with Oxy-fuel and Plasma cutting. The machine can be programmed to cut any plane shape parts composed of beeline and arc, which are same as large gantry cutting machines. It is equipped with a 7 inch LCD with dynamic and static graphical display.It can be programmed to cut parts directly, and also can be operated by using GCode generated by CAM program (Nesting software), and then be transfered to the machine via its USB Port. The CNC Controller on the machine has Memory capacity is more than 3000 files.
This machine has low capital investment, higher cutting efficiency, lower operating and maintenance cost. Being portable it doesnt occupy a fixed space / bad in your workshop and thus helps you save space. Also can be used for on-site work by fabricators because of its light weight design and low power consumption.
This product is suitable for small and medium fabrictors, widely used in automobile, shipbuilding, engineering machinery, machine manufacturers, agricultural machinery, suitable for carbon steel (flame cutting), and stainless steel (with plasma).
1. No. of gas torches - 1 Oxyfuel
2. Effective cutting width 1,500 mm
3. Effective cutting length 1500mm , 3000, 4500mm, 6000mm (Variants)
4. Positioning speed: 4000mm / minute.
5. Cutting Speed: 0 – 1500mm / minute. (settable)
6. Positioning accuracy ± 0.5 mm/ meter
7. Repeatability ± 0.5 mm/ meter
8. Shape accuracy ± 1 mm/ meter
9. Kerf compensation ± 15mm in 0.1 mm increment
10. Input Voltage: 230v 50Hz single phase.
11. Power Input: 150 watt
Machine Weight: 26kg
Portable rail weight: 35kg
Machine consists of a Cantilever structure, longitudinal rail on one axis, and moving arm on the other. This design helps save space. The smart-design with light weight and sturdy extruded aluminum structure provides easy mobility to use in indoor and outdoor working environment. Suitable for all types / segment of end-user to improve the production and reduce production cost. 7inch LCD display on the controllers allows user to select the program directly on the system or transfer files through USB drive.
The motion along longitudinal axis and cantilever arm is powered by Digital
Hybrid Stepper motors using hardened and ground rack and pinion drives. This arrangement
provides smooth acceleration, deceleration and controlled profile cutting speeds.
CNC Controller Features:
7” LCD Display
USB Port for transfer of cutting program (NC Code)
Standard shape library
Corner speed control
Wireless remote control (optional pendant)
Inbuilt memory for Program storage
Break point resume, auto power break resume, break point memory
Thick plate outside edge pierce and thin plate cross-bridge function
Built in Kerf compensation function (+- 15mm in 0.1mm increment)
Low power consumption
IBE CncCut Nesting software
• Creation of components from macros
• Automatic nesting
• Automatic setting of machine parameters
• Importation of DXF files
• Automatic grid nesting
• Automatic placement of lead-ins
• CNC programming
• Material optimization
• Cost control
OXY-FUEL CUTTING STATION
1. No. of cutting torches - 1 No.
2. Cutting thickness. Flame: 6mm-100 mm
3. Cutting / fuel gas control nozzles
4. Torch dimensions 30mm x 85mm
Plasma Cutting Station
Thickness: Depends on plasma source
• Motorised torch height control (automatic or manual) to drive torch up/ down slide (z axis)
• Manual gas control valves to adjust or set the flame and cut oxygen.
• Flash back arrestors provided on cutting station for safety of the machine.
AUTOMATIC TORCH HEIGHT CONTROLLER
Capacitive automatic torch height controller helps maintain constant distance between torch and
work piece during the entire cut motion. This helps counter the waviness and undulations present in
the work piece.
Oxyfuel Machine is upgradable in future to work with a Plasma power source for plasma cutting.
Product Image Gallery
We are manufacturers of CNC Portable Oxy-fuel profile cutting machine, CNC Portable Plasma cutting machine, CNC Portable Profile cutting machine and CNC Portable cutting machine based in Nasik, India.
Maintaince Services are available in following cities: Nasik, Pune, Mumbai, Aurangabad, Nagpur, Etc..
This product is developed and manufactured by NT Engineers, Nasik.