Cylinder Safety Valve Guards and Caps



We are manufacturing Gas Cylinder safety valve guards & caps, These valve guards are being supplied to reputed & leading cylinder manufacturers as per international standards. We assure you of quality product and price advantages due to bulk production, with maximum automation.

The design of valve guard is such that Plant filler can fill, operator can fix regulator and operate key without removing the guards. Gland nut can be tightened by with ring spanner. These guards protect the costly valves from braking, bending, controlling leakages and thread saving (in Co2). Once a guard fitted, it need not the removed for years.

The cost of safety guard is only a fraction of valve replacement cost thus ultimately there is cost saving.

To increase awareness we hereby highlight thebenefits of using safety Guards which though is compulsory but is not yet so much policed by the departments;

1. Complianceof statutory regulators
2. Safetyof life and property
3. Controlling/eliminating leakages of Gas
4. Controlling/eliminating thread damages
5. Avoidsbending and breaking costly valves

Please note : Valve guard is an important accessary of cylinder as per clause 7.1 of IS 7285 -1988. It is also statutary requirement under rule 20 SchVI(4) of Indian gas cylinder rules to provide valve protection Cap / Guard to each cylinder. PESO also recommends the use of Valve Guards.

Models Available


Model: SVGO

Model SVGO is used for all H.P. Cylinders (using key type valves) like O2, N2, CO2, Ar, He, H2 etc. The top ring is 'O' design and latest. It helps in easy movement of cylinders.

Standard Model: Available with primer and Hex bolt. Color options available.

Upgrades
Zinc (silver) plating
High Tensile Allen Bolt (M12)
Model: SVGD

Model SVGD also is used as above. The top is old 'D' type but still preferred by some.

Standard Model: Available with primer and Hex bolt. Color options available.

Upgrades
Zinc (silver) plating
High Tensile Allen Bolt (M12)
Model: VGDA

Model VGDA is for use on D/A cylinders.

Upgrades
Colour code: Maroon IS 541
Upgrade: M12 High Tensile Allen Bolt
Model: SVFC

Model SVFC is cap type & covers the valve fully. Each time it has to be removed while filling as well as usage. It is mostly used for export.
Model: SVGW

Model SVGW is used for all H.P. Cylinders (using top wheel type Valves) and is mostly used by Linde (earlier BOC) and abroad.

Standard Model: Available with primer and Hex bolt. Color options available.

Upgrades
Zinc (silver) plating
High Tensile Allen Bolt (M12)

In addition we are making safety Guards for NH3, Freon etc. Welded D/A, NH3 cyl.

Other similar equipment.

Acetylene Cylinder Bottom Rings.

Ammonia Cylinder Bottom Rings.


Liquid Cylinder Trolleys